Rjs Inspector D4000 Auto Optic (FIRMWARE version A.06 Manual de usuario Pagina 18

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 84
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 17
Inspector D4000™ Auto Optic Operator’s Guide
RJS, Minneapolis, MN 002-5564
5.0 Main Menu Selections
5.1 Calibration
Power On
When the unit is powered on, the following “Ready
Menu will display after a few seconds:
Verifier Ready
XXX Aperture: YY
XXX = indicates the wavelength (color) of the
light represented in nanometers
YY = indicates the aperture size in mils
Example:
660 Aperture: 10
This display indicates that the installed Auto Optic
uses red light at 660 Nanometer wavelength and a
10 mil diameter aperture size.
Press Enter and Select at the same time to bring up the
Main Menu:
Scan Calib Setup
Storage Inactive
D4000A Ver.x.xx
x.xx = Indicates the Software Version.
Press Select until the cursor is on CALIB and press
Enter.
D4000A Ver x.xx
Reflectance XX%
Vista de pagina 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 83 84

Comentarios a estos manuales

Sin comentarios