Rjs Inspector D4000 Auto Optic (FIRMWARE version A.05 Manual de usuario Pagina 21

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 81
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 20
Operators Guide Inspector 4000
002-5564 RJS, Minneapolis, MN
14
(See Appendix H for an explanation of Decodability grades.)
The next selection is Graph Resolution:
Graph Resolution
Choose either High or Low:
Select High to print all the data points gathered for a scan reflectance profile.
Select Low to print the same thing but in a more compressed format. This option will
save paper.
The next selection is Auto Print Mode.
Auto Print Mode
Analysis Profile
Three choices are available in Auto Print Mode:
1. Analysis Only: (For the LP2042/Companion) Both ANSI and Traditional analysis
will be printed automatically after a symbol is scanned.
2. Analysis Profile: (For the LP2042.) Scan reflectance profile graph will be added to
the analysis only printout.
3. Off: You must press the print button to print. See Appendix F (Print Functions).
The next selection is Output Device:
Output Device
LP2042
Three output choices are available: When LP2042 is enabled, the data is output in the
format required by a LP2042 printer (The LP2042 supports graphics).
Vista de pagina 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 80 81

Comentarios a estos manuales

Sin comentarios