Rjs Inspector D4000 Auto Optic (FIRMWARE version A.05 Manual de usuario Pagina 26

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 81
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 25
Operators Guide Inspector 4000
002-5564 RJS, Minneapolis, MN
19
7.0 Scanning Symbols
After a bar-code is scanned, the Inspector 4000 will respond with a crisp, chirp (or beep)
sound.
Decoded data and symbology type will display:
01928374
01 Scan Remain.
Press Enter to navigate to more detailed analysis screens:
Code 3of9
Acceptable
(See Pass/Fail Analysis Screen section)
7.1 Scanning Techniques
Lay the symbol to be scanned on a flat, non-reflective surface.
For greatest accuracy scan a symbol more than once, in both directions.
Begin a scan from the quiet zone as far from the symbol as possible. See Appendix I
for details.
Make sure the scan head is flat against the symbol.
Move the scan head across the symbol in a smooth motion. A constant speed of 5 to
10 inches per second is ideal. Scanning too fast will cause the LCD display to read
Please Scan Slower.
Vista de pagina 25
1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 80 81

Comentarios a estos manuales

Sin comentarios