Rjs Inspector D4000 Auto Optic (FIRMWARE version A.05 Manual de usuario Pagina 27

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 81
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 26
Operators Guide Inspector 4000
002-5564 RJS, Minneapolis, MN
20
8.0 Pass/Fail Analysis Screen
(See 7.0 Scanning Symbols)
After the symbol is scanned the Pass/Fail Analysis Screen may be displayed.
An example of an analysis screen for an acceptable symbol is shown below:
* RJS INC *
3of9 Pass AB-CDF
The upper row is the decoded data. (If more than 16 characters are present, those
characters will wrap to the next row of the display.) Press Enter to scroll through the
data.
If the symbology code is 128 or 93, only printable characters will be displayed. See
Appendices A and B for descriptions of how these codes are displayed.
The lower row provides the following:
Symbology type (if symbol accepted) See Table 7-1.
Pass/Fail indication
The selected grades that pass or fail. Grades to the right of the dash fail
Below is a sample of a symbology type and rejected message.
UPC-A Reject Narr
Scans remaining in multiple scan mode if the last scan has not been completed.
Vista de pagina 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 80 81

Comentarios a estos manuales

Sin comentarios