Rjs Inspector D4000 SP (FIRMWARE version A.06 and Late Manual de usuario Pagina 19

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 77
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 18
Operator’s Guide Inspector D4000™ Laser SP
002-5572 RJS, Minneapolis, MN
11
5.0 Main Menu Selections
5.1 Power On
When the unit is powered on, the following “Ready”
screen will display after a few seconds:
D4000L Ver x.xx
Ready
x.xx = Current revision of the firmware
Press Enter and Select at the same time to bring up
the Main Menu:
Scan Setup
Storage Inactive
D4000L Ver.x.xx
x.xx = Current revision of the firmware
The selectable functions are: Scan, Setup and Stor-
age:
Press Select to choose an option.
Press Enter to initiate processing for that option.
Select Scan (from the Main Menu) to display the initial
Pass/Fail Analysis screen for the previously scanned
bar code.
5.2 Setup
Select Setup (from the Main Menu) to view various
system parameters:
Press Select to choose an option
Press Enter to initiate processing for that option
Vista de pagina 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 76 77

Comentarios a estos manuales

Sin comentarios